SurroundByUs.com

***************************************************
.
This app installs the SPEC layout
plugins, and required support files
.
***************************************************
***************************************************
.
Getting Plogue latest P2 app
.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:01:14 --:--:-- 0
curl: (56) Recv failure: Operation timed out
unzip: cannot find or open /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip, /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip.zip or /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip.ZIP.
***************************************************
***************************************************
.
Installing SPEC
mkdir: /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737: No such file or directory
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file ... target_directory
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file ... target_directory
cp: /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737: No such file or directory
.
***************************************************
***************************************************
.
Set Plogue Prefrences
- recommended for first time users
enter y or n
y
.
DSP prefrences set for CD music and low DSP load
FFT Size = 4096 FFT Overlap = 4
.
FFT size and overlap can be increased for more quality
e.g. size = 8192 Overlap = 16
if your computer is fast enough, but test
with these settings first
.
***************************************************
***************************************************
.
Installation is COMPLETE.
.
Please close and restart Plogue Bidule.
.
Remember to use /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/Plogue Bidule P2.app
for this version of SPEC!!!
.
***************************************************
Close the Terminal Application to quit
logout


[Process completed]

The Plogue site has been down/slow to respond off and on lately. In fact it seems to be down right now.

To get P2, once the site is up, you could either try to run the installer again, or you could go and get this:

http://www.plogue.com/bidule/latest/Plo ... eP2OSX.zip

Download that, unzip it, and place it in the same folder as your Plogue installation. Use that, to start Plogue.

Hope that's clear.

Hello, Thank you. I downloaded P2 via the direct link, and have replaced the app in folder Plogue Bidule 0.9737 with this P2 app.

Has the prior execution of SPEC install.app already put other files into their appropriate places? How can I tell if all is fully installed and ready for operations?

Thanks,

Brian

It shouldn't replace the original Plogue executable, it should just be added to the folder. I guess it won't hurt anything however (to have removed it), just never tried it.

Yes I didn't see any other error messages in the install run you posted, so you should be good to go.