| SurroundByUs.com https://surroundbyus.com/sbu/ |
|
| Converting DTS or DTSWav to 6 mono wav files https://surroundbyus.com/sbu/viewtopic.php?f=7&t=16 |
Page 1 of 1 |
| Author: | Pl4yitLOUD [ Mon Sep 14, 2009 10:54 am ] |
| Post subject: | Converting DTS or DTSWav to 6 mono wav files |
Use (Audio Conversion in the Tools menu) to convert a DTS or DTSWav file to mono wav files, one for each channel. Alternatively, you can also use a tool like Tranzcode to obtain the same type of result (instructions here below). Download Tranzcode and GUI from here . Click on the "Click Here To Download" button and extract the file to a directory of your choice. Go to that directory and run TranzGUI. To keep things simple, first select to which format to transcode, i.e. 1 stereo wav or 6 mono wavs (see 1.) and then click on the "Input" button (see 2.) to select the file to convert. The file type in the drop-down box can be DTS or DTSWav. Both format types are selected by default. Click on the Output button (see 1.) to indicate the directory where the output will be saved. Select Run (see 2.) to start Tranzcode (in a separate DOS window). For the stereo wav option, the output will be 1 stereo wav file in 16 bit in 44.1kHz or 48.0kHz, depending on the input file type DTSWav or DTS. For the 6 mono-wav option, the output will be 6 mono wav files in 32-bit float in 44.1 or 48kHz. The example above will give the following output: 01-FL.wav, 01-FR.wav, 01-C.wav, 01-LFE-wav, 01-SL.wav and 01-SR.wav for the Front-Left, Front-Right, Center, Low-frequency ("Bass"), Surround-Left and Surround-Right channel, respectively. Back to the History 2009-09-14 : Initial Version published in Wiki (Pl4yitLOUD) 2010-08-01 : Reference added to (Pl4yitLOUD) This guide is Copyrighted © 2009-2010, SurroundByUs.com |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|