SurroundByUs.com

A Stereo-to-Surround Community
It is currently Tue Jan 23, 2018 4:43 pm
  • No posting regarding file sharing of copyrighted material is allowed
  • AudioMuxer is here
  • Spec and SpecWeb are here
 

All times are UTC - 6 hours [ DST ]


Forum rules


The tools and techniques described and provided on this forum are intended for use on material owned by users and for their personal use as covered by "fair use" and other applicable copyright laws. The owners and moderators of this forum do not suggest or condone any violation of copyright or other applicable laws. Any use of these methods outside this forum in a manner which violates "fair use" or copyright is done so at the individual's own peril and is not the responsibility of surroundbyus.com. All Methods and Guides are Copyrighted © SurroundByUs.com. Overall forum rules can be read HERE.



Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Jul 09, 2014 12:55 pm 
Offline
Stereo

Joined: Wed Jul 09, 2014 11:19 am
Posts: 2
***************************************************
.
This app installs the SPEC layout
plugins, and required support files
.
***************************************************
***************************************************
.
Getting Plogue latest P2 app
.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:01:14 --:--:-- 0
curl: (56) Recv failure: Operation timed out
unzip: cannot find or open /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip, /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip.zip or /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/PlogueBiduleP2OSX.zip.ZIP.
***************************************************
***************************************************
.
Installing SPEC
mkdir: /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737: No such file or directory
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file ... target_directory
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvX] source_file ... target_directory
cp: /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737: No such file or directory
.
***************************************************
***************************************************
.
Set Plogue Prefrences
- recommended for first time users
enter y or n
y
.
DSP prefrences set for CD music and low DSP load
FFT Size = 4096 FFT Overlap = 4
.
FFT size and overlap can be increased for more quality
e.g. size = 8192 Overlap = 16
if your computer is fast enough, but test
with these settings first
.
***************************************************
***************************************************
.
Installation is COMPLETE.
.
Please close and restart Plogue Bidule.
.
Remember to use /Volumes/Plogue Bidule 0.9737/Plogue Bidule 0.9737/Plogue Bidule P2.app
for this version of SPEC!!!
.
***************************************************
Close the Terminal Application to quit
logout


[Process completed]


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 09, 2014 1:15 pm 
Offline
Site Admin

Joined: Sat Aug 29, 2009 7:01 pm
Posts: 16
The Plogue site has been down/slow to respond off and on lately. In fact it seems to be down right now.

To get P2, once the site is up, you could either try to run the installer again, or you could go and get this:

http://www.plogue.com/bidule/latest/Plo ... eP2OSX.zip

Download that, unzip it, and place it in the same folder as your Plogue installation. Use that, to start Plogue.

Hope that's clear.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 09, 2014 2:33 pm 
Offline
Stereo

Joined: Wed Jul 09, 2014 11:19 am
Posts: 2
Hello, Thank you. I downloaded P2 via the direct link, and have replaced the app in folder Plogue Bidule 0.9737 with this P2 app.

Has the prior execution of SPEC install.app already put other files into their appropriate places? How can I tell if all is fully installed and ready for operations?

Thanks,

Brian


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 09, 2014 6:04 pm 
Offline
Site Admin

Joined: Sat Aug 29, 2009 7:01 pm
Posts: 16
It shouldn't replace the original Plogue executable, it should just be added to the folder. I guess it won't hurt anything however (to have removed it), just never tried it.

Yes I didn't see any other error messages in the install run you posted, so you should be good to go.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

Protected by Anti-Spam ACP POWERED_BY