SurroundByUs.com

Sent you a PM

Z

Evening! Stumbling through my 1st ever attempt tonight and starting to get the gist of this. While still tinkering in monitoring mode, I'm encountering an output problem between the ZPan and my M-Audio 1010LT. The hangup is the ZPan input looks like six (5) channels but the output is only three? (Okay from 1-2, 2-3, 3-4 is the issue stage, 4-5 passed same to audiocard. It's almost as if going from 3 stereo pairs to 3 mono stems in the ZPan (which I don't know how to run yet)

Input appreciated! Thanks, DADDEO

NOTE: Have also re-checked monitoring and cables with 5.1 ACID mix played to eliminate external issues.

What are the settings in Zpan, both panning and speaker angles.

Should be something like:



at least that's the default. If you pan things away from the speaker angles then you could get the results you showed.

Also, I assume SPEC 4.0 is red because you haven't installed the HNM VST used for the LFE channel?

Thanks for the reply. Copied the HNM VST to the folder as specified in the instructions so I think it's being seen. Not sure where to engage it?

Speaker angles match what you show but the ZPan looks like this and the slider's I'd need to move won't budge so something's whack:

Is the SPEC box still RED?

The ZPan thing is really strange. have to think on that one. You can just set ZPAN's processing to bypass in the mean time.